Report server web service url not working

Before you can use either application, you must configure at least one URL each for the Web service and the web portal. Reporting Services provides default values for both application URLs that work well in most deployment scenarios, including side-by-side deployments with other Web services and applications.

If you installed the default configuration, URLs were created automatically using the default values. A test link of the URL appears on page when you define the URL so that you can immediately confirm that the settings you specified result in a valid connection. The URL precisely identifies the location of an instance of a report server application on your network.

When you create a report server URL, you must specify the following parts. If you used the default values to configure URLs, you should be able to access the Report Server Web service using URLs that specify the computer name or localhost as the host name:. The settings that make these URLs available appear in the following table. This table shows the default values that enable a report server connection though URLs that include a host name:.

SYS using syntax that allows variations of the host name to resolve to a particular report server instance. If you change the service account, the Reporting Services Configuration tool will update all URL reservations that you created to pick up the new account information. This is the default security extension.

If you are implementing a custom or Forms authentication provider, you must modify the authentication settings on the report server. Optionally, you can also change the Windows Authentication settings to match the authentication subsystem used in your network. For more information, see Authentication with the Report Server.

However, if you want to restrict access or extend the deployment to enable Internet or extranet access, you might have to customize the settings to fit your requirements. This topic describes the syntax of a URL reservation and provides recommendations for creating custom reservations for your deployment. This topic summarizes the URL configuration settings so that you can understand how they compare. To avoid these errors, follow the recommendations in this topic for creating instance-specific URL reservations.

Skip to main content. Exit focus mode. There is a physical IP address for each network adapter card installed in a computer.

If the IP address resolves to a host header, you can specify the host header. If you are deploying the report server on a corporate network, you can use the network name of the computer.

Port A TCP port is an endpoint on the device. The report server will listen for requests on a designated port. Virtual directory A port is often shared by multiple Web services or applications.Before you can use the web portal or the Report Server Web service, you must configure at least one URL for each application. Configuring the URLs is mandatory if you installed Reporting Services in "files-only" mode that is, by selecting the Install but do not configure the server option on the Report Server Installation Options page in the Installation Wizard.

If you installed Reporting Services in the default configuration, URLs are already configured for each application. All parts of the URL are defined in this tool. Reporting Services provides default values that work well in most deployment scenarios, including side-by-side deployments with other Web services and applications. Default URLs incorporate instance names, minimizing the risk of URL conflicts if you run multiple report server instances on the same computer.

If IIS is installed on the same computer, check the names of virtual directories on any Web site that uses port If you see any virtual directories that use the default Reporting Services virtual directory names that is, "Reports" and "ReportServer"choose different virtual directory names for the Reporting Services URLs that you configure. Do not use a system utility. Choose a time that has low report activity. Each time the URL reservation changes, you can expect that the application domains for Report Server Web service and the web portal might be recycled.

Specify the virtual directory. The virtual directory name identifies which application receives the request. Because an IP address and port can be shared by multiple applications, the virtual directory name specifies which application receives the request.

Troubleshoot a Reporting Services installation

This value must be unique to ensure that the request reaches its intended destination. This value is required. It is case-insensitive. There is a one-to-one correspondence between a virtual directory name and an instance of a Reporting Services application.

If you create multiple URLs to the same application instance, you must use the same virtual directory name in all of the URLs you define for this application instance. Specify the IP address that uniquely identifies the report server computer on the network. If you want to specify a host header or define additional URLs for the same application instance, you must click Advanced. For instructions on how to set advanced properties on the URL, see the instructions later in this topic.

All Assigned specifies that any of the IP addresses that are assigned to the computer can be used in a URL that points to a report server application. This value also encompasses friendly host names such as computer names that can be resolved by a domain name server to an IP address that is assigned to the computer.

All Unassigned specifies that the report server will receive any request that has not been handled by another application. We recommend that you avoid this option. If you select this option, it becomes possible for another application that has a stronger URL reservation to intercept requests intended for the report server.

It supports local administration on the report server computer. If you select only this value, only users who are logged on locally to the report server computer will have access to the application. Specific IP addresses also appear in this list. If you have multiple cards or if your network supports both IPv4 and IPv6 addresses, you will see multiple IP addresses. If you select only one IP address, it will limit application access to the just the IP address and any host name that a domain name server maps to that address.

You cannot use localhost to access a report server, and you cannot use the IP addresses of other network adapter cards that are installed on the report server computer.

Typically, if you select this value, it is because you are configuring multiple URL reservations that also specify explicit IP addresses or host names for example, one for a network adapter card used for intranet connections and a second one used for extranet connections. Specify the port. Port 80 is the default because it can be shared with other applications.By using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service.

The dark mode beta is finally here. Change your preferences any time. Stack Overflow for Teams is a private, secure spot for you and your coworkers to find and share information. Is there any way to troubleshoot this situation, what is can be wrong. I totally got crazy, looks like tried it all. I think it's till something around my accounts security.

A bit late to the party, but I found this question because I ran into the same issue for some reason. Adding it to trusted sites didn't do the trick for me. This was an SSRS instance that has been running with a client for years, but for some reason stopped working at some point. It loaded for a while and then confirmed that the virtual directory was re created and the URL was reserved.

If this works, you need to then add your user account to the Content Manager role on the Home folder, and also assign your user account the System Administrator role in Site Settings.

If that doesn't work, it may be that something else on the server is already using the default port 80so in Reporting Services Configuration Manager try changing the port used by the web service and Report Manager to something else e.

I faced similar issue however the root cause in my case is little bit different. After that we changed the name of physical server so my sql named instance have differed name and its not allowing SSRS to connect with old name. To solve the issue i have updated my sql server instance name to new physical served name and it solved the issue. Learn more. Asked 4 years, 9 months ago. Active 4 months ago.

report server web service url not working

Viewed 9k times. Please help!!! Jim G. Mario Trento Mario Trento 4 4 silver badges 10 10 bronze badges. Are you trying the URL on the server or another computer?

I'm all local, everything on same laptop, tried url with port either, I clicked on url provided in configuration manager and it's same Also opened imbound firewall rule for TCP on Should be some service name to check in Task Manager?

I also checking now to add HTTP service like in this link stackoverflow.Any thoughts? Go to Solution. View solution in original post. The probably points to some sort of permissions issue on your server.

I'm not sure what this would be as the Report Server Configuration Tool should normally set the required permissions on the service account. The time has come: We are finally able to share more details on the brand-new ranks coming to the Power BI Community! Click for the top entries.

Missed the Arun 'Triple A' event or want to revisit it? We've got you covered! Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. All forum topics Previous Topic Next Topic.

Web Service URL not working. Everyone's tags 3 : newPowerBI.

Configure a Report Portal in SSRS

Message 1 of 3. Accepted Solutions. Fixed, problem was the AD account had to have administrative access to the server.You need to set permissions within SSRS to give yourself initial access.

This can be beneficial to other community members reading the thread. Good Luck! Please Mark This As Answer if it solved your issue.

Please Vote This As Helpful if it helps to solve your issue. This error occurs when you don't have permission to access SSRS.

report server web service url not working

Please ask you admin team to grant sysadmin or DBA permission to you. Please Dont forget to mark as answer. It helps others to find relevant posts to the same question. Milan Das. It specifies the prefix, host, port, and virtual directory for the Report Server Web service.

Depending on how you specify the host, multiple URLs might be possible for a single reservation. The default value for the host specifies a strong wildcard. A strong wildcard allows you to specify in a URL any host name that can be resolved to the computer that hosts the report server. Silverlight Developer Center. Sign in.

United States English. Home Library Learn Downloads Forums. Ask a question. Quick access. Search related threads. Remove From My Forums. Answered by:. SQL Server. Sign in to vote.

Troubleshoot a Reporting Services installation

Monday, August 10, AM. Hope this helps! Thanks all for your reply. I also want to see the web service. How can I? Thanks Manu.You can also configure the web portal as a post-installation task.

This topic provides information about the following the web portal configuration scenarios:. You must have a minimally configured report server. For more information about minimally configuring a report server, see Configure a Report Server. Your report server must run in native mode.

You cannot use the web portal with a report server that is configured for SharePoint integrated mode. In SQL Server you cannot switch a report server from one mode to the other. If you want to change the type of report server that your environment uses, you must install the desired mode of report server and then copy or move the report items to the new report server. This process is typically referred to as a 'migration'. The steps needed to migrate depend on the mode you are migrating to and the version you are migrating from.

For more information, see Upgrade and Migrate Reporting Services. You must also have Internet Explorer 11 or later with scripting enabled. The web portal is a Web application that users access in a Web browser. Minimally, you must define the URL used to open the application in a browser window. The URL consists of a host name, port, and virtual directory. By default, the web portal URL consists of a unique virtual directory name, plus the port and host name that is defined for the Report Server Web service that runs in the same instance.

In most cases, the host name is the network name of the report server computer, but it can also be an IP address or host header that resolves the computer. If you try to access the web portal on a remote computer and you receive connection error messages in your browser, a common cause is Firewall settings. If you are using Windows Vista or Windows Serveradditional steps might be required before you can use the web portal.

By default, the web portal connects to the Report Server Web service that runs in the same Report Server service.

report server web service url not working

However, for some deployments, you might want the web portal to always connect to the Web service through a static URL. An example of why you might want to do so is if you configured packet filtering on a specific port or IP address, and you want all connections to the report server to go through the filter rules you defined.If you cannot install Reporting Services because of errors that occur during setup, use the instructions in this article to address the conditions that are most likely to cause installation errors.

Review the Online release notes in case the issue you encounter is described in the release notes. A subfolder is created each time you run Setup.

The subfolder name is the time and date you ran Setup. Setup checks prerequisites automatically. However, if you are troubleshooting setup problems, it is helpful to know which requirements Setup is checking for. Account requirements for running Setup include membership in the local Administrators group.

Setup must have permission to add files, registry settings, create local security groups, and set permissions. If you are installing a default configuration, Setup must have permission to create a report server database on the SQL Server instance on which you are installing. NET Framework version 2. Reporting Services Configuration Manager Does not start. Reporting Services PowerShell cmdlets are not available and commands are not recognized.

You see an error message indicating the URL is not configured. Setup fails on a computer with SharePoint installed but it is not configured. SharePoint Central Administration Page is blank. You see an error Message when you try to create a new Report Builder Report. Reporting Services is architected for the SharePoint service architecture.

Troubleshoot Problems with SharePoint Mode installations. Right-click the icon and click Run As Administrator. Run the following three cmdlets from the shell:. Description: When you try to run a Reporting Services PowerShell cmdlet, you see an error message similar to this one:. Install the first Report Server in SharePoint mode. Use Central Administration to verify and fix one or more of the following issues:.

The SSRS service application proxy is not configured.


Leave a Reply

Your email address will not be published. Required fields are marked *